Skip to main content
1-Year Coverage

Above Ground Liner Warranty

One Year. No Nonsense. Just Coverage That Counts. Our 1-Year Limited Warranty protects against seam separation caused by manufacturing defects.

Above Ground Pool

Our Premium Above-Ground Pool Liner Warranty

Overview:

Branded Manufacturing, LLC warrants its above-ground pool liners to be free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. This limited warranty applies solely to the original purchaser and only to liners installed and maintained according to the guidelines below.

Warranty Coverage

Covers seam separation or failure due to manufacturing defects, reported within the warranty period and prior to improper installation or use.

Note: This warranty specifically covers the seams of the liner.

Not Covered

Rips, tears, punctures
Wind/ice damage
Improper chemical use
Fading
Emptied pools
Installation/labor costs
Incidental damages

Claim Procedure

Submit the following to Branded Manufacturing, LLC:

  • Purchaser's name and contact info
  • Proof of purchase (order/invoice number)
  • Liner serial number (on back of bead near wall splice)
  • Two wide-angle photos of the installed liner
  • One close-up photo of the defect

Send all claims to:

warranty@brandedmfg.com

Returns require pre-approval with RMA. Items must be returned freight prepaid.

Installation Guidelines(Required for Warranty Validity)

14" down x 4" out masonry sand or foam cove around entire pool perimeter.
2Liner should be placed in sun pre-installation to relax material.
3Base must be smooth, level, and debris-free.
4Use vacuum during fill to pull liner tight and detect wrinkles.
5Maintain balanced water chemistry (pH 7.2-7.6, TA 80-120 ppm, Chlorine 1-3 ppm).
6Avoid sharp edges and ensure liner is securely fitted using correct coping, track, or stabilizer rail.

Seam Separation Examples

Seam separation example

Image 1 – Defective Sample

Serial number example

Image 2 – Liner Serial Number

Bead serial number

Image 3 – Bead Serial Number

YOUR WARRANTY MUST BE REGISTERED BEFORE CLAIMING

Register Your Warranty